How to use ENTR smart lock
How to use ENTR smart lock
ENTR smart lock solution which allows you to control your door lock right from your smartphone, tablet and a variety of other access devices. KEY FREE. BE FREE. Step by step of how to use the ENTR smart lock:
How to set up and operate
- To activate the unit use the on/off button
How to set up a pin code
- To activate up to 5 seconds, touch the key pad
- Select code
- Enter default pin code 12345#
- Create and enter a new pin code (4-10 digits) followed by # sign, e.g. 54321#
- Re enter pin code
How to do the configuration
- To activate up to 5 seconds, touch the key pad
- Select cfg
- Enter new pin code
- Select enter location on the door – for left side press 1 – right side press 3
- Hold door closed during calibration
How to use sliders to operate lock
- Slide fingers down the side of the unit
How to do auto locking
- Door is automatically locked whenever closed
How to use pairing remote control
- Touch the keypad to activate up to 5 seconds
- Select add
- Enter pin code followed by #
- Select 1
- Press down the remote’s main control button until you hear bleeps from the door unit
- Touch the keypad to activate up to 5 seconds
- Select Del
- Enter pin code followed by #
- Press Del – Note this deletes all paired remote controls
How to use Pairing Smartphone
- To activate up to 5 seconds, touch the key pad
- Select add
- Enter pin code followed by #
- Select 2
- Refresh the app
- Create a lock name
- Set owner password. Use upper and lower case, letters and numbers
- Confirm owner password
- Registration details
- Press on V sign
- Swipe down to unlock
- Lock indication
How to use Manual Mode
- Touch keypad – activate up to 5 seconds
- Select M/A
- Enter pin code followed
- Manual mode will disable auto locking
- Open the door from inside using the sliders
- Slide your fingers up for locking
- Push and turn the knob to unlock/lock
- Use the remote control to unlock/lock
- Touch the keypad to activate – up to 5 seconds
How to change to automatic mode
- Select M/A
- Enter pin code followed #
How to toggle the sound signal
- Touch keypad to activate up to 5 seconds – Press mute. When the mute icon illuminated the sound signal is off. Note: It will not mute touchpad; mechanical overdue or low voltage sounds.
How to use a wired charger
- Plug in the charger
- Connect the micro USB
- During charger indicator will blink once battery is full – blinking will stop.
How to use a wire free charger
- Plug in the charger
- Connect the micro USB
- During charging indicator will blink. Once battery is full, blinking will stop.
- Disconnect the USB
- Connect the micro USB